NOTE: Following stain colors are shown as reference, actual color may slightly vary depending on texture of wood
Differentiating features and application from other packages within same product category:
- Clear Display that can be used as table, display, or stand
- It allows access to content from side/sides easily
See “Open-Side Stands/Tables/Displays” for all options
Note:This product is Patent Pending
|Item||Description||Total weight lb(Kg)|
|00960-1||Open-side Clear stand/Table/Display (open in one side)||31 (14)|
|00960-2||Open-side Clear stand/Table/Display (open in two sides)||30 (13.5)|
|00960-3||Open-side Clear stand/Table/Display (open in three sides)||29 (13)|
|00960-4||Open-side Clear stand/Table/Display (open in four sides)||28 (12.5)|
1) Main Applications and features:
This portable display product can be used as a side table, display or decorative stand in trade shows, retail stores, businesses or even homes. It can be placed on top of a table or stand that is larger than 20×20″ footprint. It also can be used as a side table. It can get assembled/disassembled easily to its elements and get packed and shipped with minimal cost and possibility of damage to any part.
This Display product is made of clear Acrylic sheets to allow proper view of the items inside while having quick access to content from one or more openings from side without any doors.
Also see info in “Open-Side Stand/Table/Display” page.
2) Specifications of Standard Package:
- Length:20″ (51 cm)
- Width: 20″ (51 cm)
- Height: 20″ (51 cm)
- Opening Size:14.30″ X 14.30″ (36 cm X 36 cm)
- Sheet Elements: Clear Acrylic, 1/4″ (6mm) thickness
- Edge Elements: Hard Wood
- Maximum even load on top face: 15 Kg (33 lb)
- Maximum even load on bottom face with 5mm (3/16 inch) thickness support plate underneath: 15 Kg (33 lb)
- Maximum even load on bottom face without 5mm (3/16 inch) thickness support plate underneath: 5 Kg (11 lb)
3) Standard Choices:
3-1) Choices for Color of Edge Elements:
Edge elements are framing that join the sheet elements to one another. They are used for ease of assembly/disassembly with no fasteners:
There are no standard options offered for this product.
5) Shipping Info and Options:
Number of shipping packs: One
Shipping Pack Material: Corrugated Box
Shipping Pack Size: 22X 22 X 4.5″ (56 X 56 X 11 cm)
Approximate Weight of shipping pack:
- Package 00960-1: 31 lb (14 Kg)
- Package 00960-1: 30 lb (13.5 Kg)
- Package 00960-1: 29 lb (13 Kg)
- Package 00960-1: 28 lb (12.5 Kg)
5b) Shipping Options:
6) Downloads and Resources:
|Container||Download Info (Standard Designs)||Download Links (Register Or Login To View download Links)||Notes|
|Complete Assembly of Table/Stand/Display||Complete Assembly Picture|
|Exploded Assembly Picture With Assembly Info|
|Display||3D model of Display
(no software needed)
|Not Available Yet|
|Assembly Instruction Video for Display||Any side can be open|
|Assembly Instruction For Display||Not Available Yet||Any side can be open|
|Detail Drawing and Bill Of Material For Display||Not Available Yet|
7) Printing on Sheet Elements of Display:
Following section is provided to assist you in ordering your printing requirements to your large format printing service provider. If you want us to provide printings for your display, please contact us (some condition applies).
All Sheet elements of these portable products are made from clear material but in following picture only open element is shown clear and the rest of view sheets are shown Opaque with a reference naming on them.
To prevent any confusion regarding printing faces and Sheet elements, please consider shown naming convention. For example if you want to print on outer face of sheet “D”, you are referring to face “D1b”. The first letter indicates the selected Sheet element, the second letter indicates the important side of view (1: View from Outside, 2: View from inside), the third letter indicates the reference display portion (b: bottom display)
Following table shows recommended size of Printing-substrate and dimensions of Printing images, if you wanted to have a print that covers the entire face of a Sheet element. Also make sure there is 1/2″ (12mm) margin is considered at all sides; picture to be sized to have all important material inside the 1/2″ (12mm) offset frame. Printing may apply to sides that do not have access through.
For more details see page “Printing Guide“.
|Reference Print Side||** Printing Type||Substrate Height
Height after Cut
Width After Cut
|Needed Height of Print Image||Needed Width of Print Image||Note|
|B1b, D1b, E1b, F1b||Cling or Vinyl Mounted on Inside Face||447 mm
|453 mm 17.83 inch||453 mm 17.83 inch||– Will have a small gap in outer borders of print
– Cutting is done with 3mm (1/8″) bleeding
|Cling or Thick Vinyl Mounted on Outside face ( creates a border)||451 mm
|457 mm 17.99 inch||457 mm 17.99 inch||– Will have a small gap in outer borders of print
– Cutting is done with 3mm (1/8″) bleeding
|Thin Vinyl on Outside face, Trim the Edges after mount||487.8 mm
|469 mm 18.46 inch||469 mm 18.46 inch||No Gap around, Trim the Edges after installation|
|Direct Print on a Face||475.8 mm
|469 mm 18.46 inch||469 mm 18.46 inch||No Gap (some bleeding is Considered)|
8) Custom Designs:
Note: Standard Opening shape for side sheet elements is square shape with generous radius at corners. Custom opening shapes and dimensions can be ordered (some conditions apply).
These display products are designed and manufactured in Canada. We can provide unmatched custom design and service for this product and similar designs. Some custom features are: Custom Sheet Materials, color choices, especial print requiremenets, especial lighting requirements, especial Edge lighting and Etching services, etc. (some conditions apply). Contact us for further details.